How To Make A 3d Pyramid

Download Article

Paper pyramids are fun and interesting 3D objects to make, and at that place are several ways that yous can create them. For instance, you can brand an origami pyramid that doesn't require tape or mucilage, or you tin can brand a paper pyramid using a template, some scissors, and a fleck of glue or record. Whether yous are doing this for a school project or just for fun, paper pyramids can be decorated in many ways, fabricated with different types of paper with diverse designs, or tin can even be painted or colored to look like authentic Egyptian pyramids.

i
Discover a square slice of paper. To brand a pyramid, y'all need to get-go with a paper that has equal dimensions in length and width. The thicker the paper, the more durable the pyramid, but if you go besides thick, the pyramid will be difficult to fold. Skillful paper choices include:
- Origami paper
- Construction paper
- Cardstock
2

Fold and unfold the newspaper. Offset, fold and unfold it diagonally through the center from top right to bottom left, and then diagonally through the center from the peak left to bottom right.^[1]

Advert
3

Lay the paper flat on a table. Look at the folds you lot've made (the paper volition be folded into 4 triangles). Either with a pencil or in your mind, label the four folds that divide the newspaper into quarters as A, B, C, and D (in club, going counter-clockwise).
4

Orient the paper. You want the newspaper in front of you so that the triangle labeled side D and A has its bottom edge facing you.
5

Fold the newspaper into a smaller triangle. Start by folding the left side of the triangle in one-half in on itself, so the outer edges of sides C and D come across. Repeat on the other side, so that the outer edges of sides A and B meet.^[2]
6

Fold the triangle into a square. Start on one side, and fold the bottom corners in toward the center, so that each lesser corner comes to meet the top corner. Repeat on the other side.
7

Fold the square into a kite. Orient the square so information technology looks like a diamond, with all the folded flaps at the pinnacle and the bang-up lesser point facing yous. On each side of the paper, fold the 2 side points of the diamond into the center and so the bottom edge of the diamond lines upwards with the center edge of the square.
8

Anchor the folds. On each of the four kite faces, open each fold one at a fourth dimension until you get a small-scale correct triangle sticking out the back of your fold. Fold this little triangle down over the forepart, and and then refold all the original folds. Repeat with each kite face.
9

Fold down the tip of the kite. Fold it dorsum and forth to create a nice pucker.^[3] Now, stand the kite up on the bottom tip, and gently press the centre tip at the top. The paper should begin opening upward and unfolding at the base at the last crease you lot fabricated. In one case it unfolds into a triangle, you lot tin square off the edges of the base and the sides of your newspaper pyramid.
10

Finished!

ane
Impress or draw a pyramid template. Either use a square piece of paper to create your own template or print 1 off and use information technology equally either the paper for the pyramid or a cut-out template that you can trace onto a different piece of paper.
- A proper pyramid template pattern will take a square base, and of each side of that base, there will exist an attached triangle. 2 or all four of these triangles will have tabs on them. Once cut out, the four triangles volition come together and join at the height to form the pyramid faces.
two

Cut out your pyramid design. The tabs on the side are important (so don't cut them off) because these will be used to mucilage or record the sides of the pyramid together.
3
Flip the paper over and decorate information technology. Now that the pattern has been cutting, y'all accept the basic shape for your pyramid, and it tin can now be decorated any style you like. Remember that the faces on the underside of the paper will become the exterior, so be sure to decorate the right side!
- Try drawing an overlapping grid pattern to get in look similar the bricks of an Egyptian pyramid.
4
Pucker all the pyramid edges. Afterward decorating, flip the pyramid back over to create creases so that the faces will come together nicely. Make sure to directly the creases inward, and don't forget to pucker the tabs as well.
- If you are using thicker paper, such every bit cardboard, consider using a hobby knife or scissors to gently trace the lines where the pyramid volition bend and fold.
five

Form the pyramid. Apply glue or tape to the outside edges (the decorated side edges) of all the tabs. Bring the four faces of the pyramid together, securing them to each other by positioning the gummy tabs on the inside of the pyramid faces.^[iv] Gently press the sides to the tabs and allow the gum to dry.

Advert

Add New Question

Question

How do I give a bore calculation?

The diameter is the measurement across the circumvolve so you lot tin employ a tape measure of double the radius. To present it say d= any.
Question

How does the pyramid close in the 2nd part?

Apply glue or tape to the outside edges (the decorated side edges) of all the tabs. Bring the four faces of the pyramid together, securing them to each other by positioning the sticky tabs on the within of the pyramid faces. Gently printing the sides to the tabs and allow the glue to dry out.
Question

How exercise I make my paper pyramid firmer?

Madeline Babcock

Community Answer

Use stronger paper. There are different types of house paper y'all tin try, these are non mentioned in the tutorial but piece of work well for a stronger newspaper structure.

Ask a Question

200 characters left

Include your email address to become a bulletin when this question is answered.

Submit

Video

Thanks for submitting a tip for review!

Well-nigh This Article

Article Summary X

To brand a newspaper pyramid, start by folding and unfolding a square slice of paper in one-half diagonally both ways. And then, rotate the paper so that it looks like a diamond and fold it into a small triangle. Next, fold the triangle into a square and then fold the flaps in so information technology looks like a kite. Finally, anchor the folds and fold the tip of the kite downwardly to finish your pyramid. To learn how to brand a cutting-out paper pyramid, scroll down!

Did this summary help you?

Cheers to all authors for creating a folio that has been read 281,182 times.